A few pictures below of our February 2021 photo meeting:
Click on images to enlarge
Ray has re-built a O-16.5 Smallbrook Studios “Eros” with a new bunker and raised cab. The chassis is a good runner, – a Hornby Bill and Ben type.
Over the last few months Chris has been building wagons in O9 scale using Evergreen sheet and strip on modified Peco chassis. Some of them have now been painted and lightly weathered, and have Greenwich couplings. Many of the wagons have loads using Skytrex parts, the stationary engine is built from a kit by Duncan Models and the bell is a nod to Sir Arthur Heywood who pioneered minimum gauge railways and was also a keen bell ringer.
A 009 scale War Department Baldwin 4-6-0 by Bertie as used behind the front line at the end of WW1. The kit is a Gem kit and utilises a Graham Farish 0-6-0 from a BR diesel shunter
Alan’s SM32 16mm details: Now finished is the sand hopper which has tension rods, pin heads and bolt detail. The 45 gallon drums are made from card, with scratch built engineers bench, arc welder and Snap-on type toolbox along with 3D printed tools. Also, he has been progressing with details for his vertical-boilered loco, fixing pistons to the boiler.
Graham has added some Phoenix figures to the village board on “Raven Hill” (O9) some of which are shown on the platform where tram loco “Pyralis” is arriving. He is also building a 4-wheel balcony coach using some toy coach sides, plastic mouldings and plasticard. Also now built is a leg system for the layout.
Stewart has added lettering to his 3mm Scammell and is building a 009 Roxey Mouldings “Hampton” kit on an Ibertren chassis for a friend.A new 009 acquisition for Dave, a Southend Pier Railway Toastrack car by Shapeways.
A new photo of Stuart’s 5″ gauge American loco, and work on a 4mm scale Norfolk Heath Southwold Railway kit to offer after correcting the brick “bond”.
NORFOLK & SUFFOLK NARROW GAUGE MODELLERS 